Loading sub-menu...


Skip to end of metadata
Go to start of metadata
You are viewing an old version of this page. View the current version. Compare with Current  |   View Page History

By downloading, I agree to the non-commercial license.

Comunity mailing list - subscribe


Para esta primera release se proponen dos configuraciones de referencia. La primera usando una cámara web USB y la segunda usando una Video Capture Card como Hauppauge PVR350. En ambos casos se recomienda usar una VGA Capture Card del modelo VGA2USB o superior.

Video Capture Card
Known Good Hardware Notes
Processor & Motherboard
Intel i3 Processor
No se necesita mucha CPU, ya que la video capture card codifica el video por hardware
Video Capture Card
Hauppauge PVR250
Hauppauge PVR350
Hauppauge HVR1600
VGA Capture Card
WebCam USB
Known Good Hardware Notes
Processor & Motherboard
Intel i5 Processor
Al codificar los dos vídeos se necesita más CPU
Video Capture Card
Hauppauge PVR250
Hauppauge PVR350
Hauppauge HVR1600
USB Logitech HD Pro Webcam
Valido con todas las webcam USB compatibles con V4L2
Sound Cart Linux compatible  

En la sección de cookbook encontraras recetas para configurar las capture card en linux


Galicaster is based on Open Source technologies. 

Para probar esta primera release se recomienda el uso de Ubuntu 10.04 LTS sobre el hardware antes descrito. Sobre el en necesario instalar las dependencias y realizar la comprobaciones básicas:

1.- Install dependences
  • Gstreamer
  • python-setuptools and pip
  • iCalendar
  • pyCurl
  • Capture card configuration tools
$ sudo apt-get install \
    gstreamer0.10-ffmpeg gstreamer0.10-alsa gstreamer0.10-plugins-bad gstreamer0.10-plugins-bad-multiverse \
    gstreamer0.10-plugins-base gstreamer0.10-plugins-base-apps gstreamer0.10-plugins-good \
    gstreamer0.10-plugins-ugly gstreamer0.10-plugins-ugly-multiverse
$ sudo apt-get install python-pip python-setuptools
$ sudo pip install icalendar
$ sudo apt-get install python-pycurl
$ sudo apt-get install v4l-conf v4l-utils guvcview
2.- Check configuration
$ python --version
Python 2.6.6

$ python -c "import pygtk; pygtk.require('2.0')"
$ python -c "import pygst; pygst.require('0.10')"
python -c "import pycurl"
python -c "import icalendar"

$ gst-launch v4l2src num-buffers=25 ! video/x-raw-yuv,width=800,framerate=24/1 ! ffmpegcolorspace ! xvimagesink
$ gst-launch v4l2src num-buffers=25 ! video/x-raw-yuv,width=800,framerate=24/1 ! ffmpegcolorspace ! x264enc pass=5 quantizer=22 speed-preset=4 profile=1 ! queue ! avimux ! filesink location=out.avi
$ file out.avi
out.avi: RIFF (little-endian) data, AVI, 800 x 600, ~24 fps, video: H.264 X.264 or H.264
$ rm out.avi
3.- Dowload software

Para instalar descargarse el programa

4.- Config galicaster

The values are in the file conf.ini


  • basic
    • repository: path to the working folder.
    • admin: enables admin mode (True|False)
  • screen
    • right: Name of the video device to be shown in the right screen (None to deactivate).
    • left: Name of the video device to be shown in the left screen (None to deactivate).
    • cursor: Shows or hides the cursor. (True|False)
  • ingest
    • The data to connect Galicaster to an Opencast-Matterhorn server.
  • track
    Values common to all devices:
    • name: Name assigned to the device.
    • device: Tipo de dispositivo. (v4l2|vga2usb|webcam|hauppage|pulse)
    • flavor: Matterhorn "flavor" associated to the track. (presenter|presentation|other)
    • location: Device's mount point in the system (p.ej. /dev/video0).
      • For PulseAudio devices run:
        pactl -list | grep "Source" -A 5
        and use "Name:" as the "location" field.
      • file: The file name where the track will be recorded.
      • active: Whether the device will be played and recorded. (True|False)

Values in audio (pulse) devices:

    • playing: Indicates if the audio, apart from being recorded, is played. (True|False)
    • vumeter: Activates data sending to the program's vumeter. (True|False)
      Only one device should be activated.
    • amplification: Gstreamer amplification value: < 1 decreases and > 1 increases volume.
      Values between 1 and 2 are commonly used.
5.- Running

Galicaster Class is launched by running the command:

$ ./classexec
Enter labels to add to this page:
Please wait 
Looking for a label? Just start typing.