Galicaster Classroom KIT

{pop-away:metadata | comments | children | labels}

{section}{column:width=68%}

{tip:title=All you need to setup a lecture capture ready clasroom}
{tip}

h5.


h5. What is a Galicaster classroom KIT ?

It is a Kit including 1 Galicaster RACK unit and a complete Accesories KIT to setup a lecture caprute (recording) ready classroom or lecturehall. The Accesories KIT includes an HD-USB ceiling camera with it's stand, Rack unit, touch screen, stand for touch screen and wireless microphone,



h5. Common deployment scenario

The rack should be installed on the ground and solidly secured, away from usual audience paths. It is typically placed on a side of the blackboard, on a convenient location to access the power supply and a network socket.
The recording unit (Galicaster RACK) should be placed inside the rack and connected to the building computer network using an apropiate Ethernet cable.

!Esquema aula.jpg|border=1!


h5. Camera installation

The camera should be installed attached to the ceiling, according to the following recommendations:
The optimal position for the camera is typically about 5m ahead of the wall - the one being recorded\- but it also depends on the blackboard size, in order to record it completely.
The angle formed between the horizontal axis at the height of the lecturer’s head and the straight line going from the camera to the lecturer’s head must be within 15° and 20°. This requirement is illustrated in the following image:

 !Esquema cámara techo.jpg|border=1!


{column}

{column: width=30%}

 
  !GClassroom-KIT.jpg|border=1,width=300!
*Accesories KIT*

 !Galicaster RACK.jpg|border=1,width=300!\\
*Galicaster RACK*

 !DSC_2364b.jpg|border=1,width=300!
*Classroom KIT working*
{column}
{section}