|
Key
This line was removed.
This word was removed. This word was added.
This line was added.
|
Changes (10)
View Page History...
{code}
Once you identified the format you want to capture, edit the _conf.ini_ file you've just downloaded. Search for the _track_ Blackmagic and change the parameters _input_ and _input_type_ for their right values. Some try-and-error may be neccessary since maybe you can't gather all the information from your video source.
The _p_ in 1080p stands for _progresive_
The _i_ in 1080i stands for _interlaced_
The _i_ in 1080i stands for _interlaced_
...
Inputs 2, 4 and 5 are for RCA.
{anchor:sound}
h4. C.3 Sound configuration
h4. C.3 Sound configuration
...
*Pulse input ( Line in):*
_If you are using the Hauppauge card please skip this section_
_If you are using the Hauppauge card please skip this section_
First of all, go to the Sound Manager (speaker icon on the top right corner of the desktop), select the input you are using and set the values to no amplification, 100% volume, no amplification.
Later, if you have distortion on your audio input, edit the conf.ini and set _amplification = 1.0_ in the AudioSource device.
*Headphones output*
*Headphones output*
Regulate this slide bar to a conmfortable sound level.
*Galicaster Vumeter*
...
If you still experience problems after configuring the Sound Manager and your Mixer or Sound input device, you should take a look to ALSA.
Run _alsamixer_ on a shell and ensure that your device is not being amplified. You can check the real Gain on _Item_ on the top left corner of the screen. Press F6 to select the input and F4 to go to the Capture section.
Run _alsamixer_ on a shell and ensure that your device is not being amplified.
* Press F6 to select the input and F4 to go to the Capture section.
* You can check the real Gain on _Item_ on the top left corner of the screen.
* Press F6 to select the input and F4 to go to the Capture section.
* You can check the real Gain on _Item_ on the top left corner of the screen.
{anchor:mh}
h3. D. Opencast Matterhorn related configuration
h3. D. Opencast Matterhorn related configuration
...
{code:none}
username:= matterhorn_system_account
password:= CHANGE_ME
{code}
...
workflow-parameters = trimHold:true
{code}
{code}
This piece of code must be written on one of the configurations file. Be aware that values in _conf.ini_ will overrule its equivalent in _conf-dist.ini_.