h3. B. Network Configuration
h4. B.1 Matterhorn configuration
If you have a OC-Matterhorn running you should ask your Matterhorn system manager for some information. First of all you need a *digest user* - a regular one won't work-, there is a default account for this matters that should be replaced for custom ones.
{code:none}
username: matterhorn_system_account
password: CHANGE_ME
{code}
You need the admin host address, port included. For example:
{code:none}
host = http://fakeadmin.matterhorn.com:80
{code}
You also need to stablish a default workflow and its parameters. Scheduled recordings will have his own workflow and parameters, set on the scheduling operation, but not the recordings started manually. The usual parameters you have to set are *captions* and *trimHold*, which value is *False* by default. The usual configuration is:
{code:none}
workflow = full
workflow-parameters = trimHold:true
{code}
If you have more than one parameter:
{code:none}workflow-parameters = trimHold:true;captions=True{code}
Finally, you have to decide if your recordings should be recorded automatically or not. If you want to do so, set *default* to True. All the configuration together will look like:
{code:none}
[ingest]
active = True
default = False
host = http://fakeadmin.matterhorn.com:80
username = matterhorn_system_account
password = CHANGE_ME
workflow = full
workflow-parameters = trimHold:true
{code}
h3. C. Galicaster configuration
Galicaster is configurated by a pair of files _conf-dist.ini_ and _conf.ini_. You can download two different models of _conf.ini_ depending on the cards you are using:
* Blackmagic + Epiphan: [conf.ini | http://webfiler.teltek.es/webfiler/galicaster/configs/bm_mobile/conf.ini]
* Hauppauge + Epiphan: [conf.ini | http://webfiler.teltek.es/webfiler/galicaster/configs/hau_mobile/conf.ini]
h4 C.1 Sound configuration
To have the best audio feedback on your interface you should configurate your audio inputs properly.
*Pulse input ( Line in):*
_If you are using the Hauppauge card you don't have to worry about all this._
First of all, go to the Sound Manager ( speaker icon on the top right corner of the desktop), select the input you are using and set it with no amplification, 100% volume.
Later, if you have distortion on your audio input, edit the conf.ini and set _amplification = 1.0_ on the AudioSource device.
*Headphones output*
Regulate this slide bar to a confortable sound level.
*Galicaster Vumeter*
Add this section in the _conf.ini_ file.
{code:none}
[audio]
min = -60
max = 0
{code}
If the NO SOUND dialog is coming in and out constantly, set a higher value on _min_, for example -40.
* Alsa Advanced configuration *
If after configure the Sound Manager and your Mixer or Sound input device you still have problems, you should take a look to ALSA.
Run _alsamixer_ on a shell and ensure that your device is not being amplified. You can check the real Gain on _Item_ on the top left corner of the screen. Press F6 to select the input and F4 to go to the Capture section
h3. D. Troubleshooting
h5. Noise
* Monitor
* Power supply
h5. Video malfunctioning
* Green image
* Black & White
* Black screen
...