Galicaster is based on Open Source technologies.
Before starting the installation process, please make sure that:
The installation process consists of six steps: installing dependencies, checking the configuration, downloading software, configuring Galicaster, checking the connection to a Matterhorn core and testing it.
As a faster alternative, Galicaster can be installed using a debian package format.
Galicaster requires the following software to be installed:
- python-setuptools and pip
- Capture card configuration tools
Run the following commands in a shell in order to verify that all dependencies are installed:
By downloading, you agree to the non-commercial license. (Commercial licenses also available under request)
Download the software from this site.
Uncompress it using tar:
Recommendation: Move galicaster-1.2.0 folder to a familiar location
Galicaster configuration is in the files conf-dist.ini and conf.ini. *Any duplicated value on conf.ini will prevail over the same ones on conf-dist.ini.
All the application parameters can be set up in these files, such as:
- Operation mode of the application: I.e. whether Galicaster will work as Galicaster Class, designed to be used in a classroom environment, or as Galicaster Mobile, a portable recording station.
- Devices used in the capturer, and their configuration.
- Server information to ingest.
- User privileges to control the recorder.
The simplest way to get started with Galicaster is dowloading any of the pre-existing files for any of the reference configurations proposed: leaving conf-dist.in *unchanged as a reference, and make any modification you need on conf.ini*:
- Operation mode Galicaster Class:
- Operation mode Galicaster Mobile:
In the Section Galicaster configuration you will find a description of all section of conf.ini file.
One of the key features of Galicaster is the connection to the publishing platform. If you are using Matterhorn as your media publishing and distribution system, you need to configure Galicaster to work as a Capture Agent and connect it to your core machine. Here are some tips to do so:
- Your Galicaster unit needs access to your Matterhorn Core network.
- Use a valid host URL. It may be a fully-qualified name or simply an IP address.
- If your Matterhorn Core is not running in the default port (80), then you need to explicitly include it in the URL (i.e. http://<host_name_or_ip>:8080).
- The use of the http:// prefix is mandatory.
- You need to use a Matterhorn account which authenticates via Digest (usually, this account is set up in the config.properties file in your Matterhorn server). A regular account will not work.
- Remember to activate the connection in Galicaster (in the configuration file, section ingest, value active).
- A wrong workflow will raise an error in Matterhorn. Please make sure you use a workflow name that exists in the machine you connect Galicaster to.
- Workflow parameters are available but optional. A unexisting or wrong parameter won't affect the process, a mistaken value will be considered as "False".
- Check your Galicaster unit is registered as a Capture Agent in the Admin Tools section of your Matterhorn installation.
- The log (in /tmp/galicaster.log) will record any problem occurring on the connection to the Matterhorn server.
If your Galicaster is registered as a Capture Agent you should be able to receive the recording schedule, if any, and ingest any recordings in Galicaster to the Matterhorn Core. If this is not so, please review all the steps above and try again. The logs in Matterhorn and Galicaster will give you the hints to know what is failing.
Galicaster Class is launched with the command:
To install Galicaster using the debian package, [download|] it and run in a shell:
or double-click over on the file browser, running it with the Ubuntu Software Center
If the Ubuntu Software Center installation is selected, a warning appear since Galicaster is not packaged following the standards strictly, ignore it and continue the installation
Using this method, Galicaster will be installed on /usr/share/galicaster, and the configuration files should placed on /etc/galicaster/conf.ini and /etc/galicaster/profiles.
To remove it, run on a shell:
Those files on /etc/galicaster won't be removed.